# 5 ways to measure mutual fund risk

Source: https://koshex.com/blog/5-ways-to-measure-mutual-fund-risk · Published 29 September 2024 · 10 min read

Five numbers describe a fund's risk from its past returns. Standard deviation shows how much returns swung, beta how the fund moved with its benchmark, and alpha the return earned for the risk taken. The Sharpe ratio shows return per unit of swing, and maximum drawdown the deepest fall. None predicts the future.

## Key takeaways

- Each of the five measures answers one question about a fund's past returns, and none of them predicts what comes next.
- Compare these numbers only between funds in the same category and over the same period.
- Factsheets usually work out standard deviation and beta from monthly returns over the past three years.
- Alpha is the return earned for the risk taken, not a measure of risk, and factsheets rarely print it.
- Maximum drawdown is the deepest fall from a high point, and you read it from a NAV chart.

Five numbers, all worked out from a fund's past returns, describe its risk. Standard deviation shows how much the returns swung. Beta shows how the fund moved with the market. Alpha shows whether it earned more than that risk suggested. The Sharpe ratio shows how much return it earned for each unit of swing, and maximum drawdown shows the deepest fall it went through. None of them predicts what comes next.

## How do you measure a mutual fund's risk?

You measure it with five numbers, and each one answers a single narrow question. No one number covers everything.

A few words first. An **index** is a list of companies picked by fixed rules, whose combined value is tracked every day. A **benchmark** is the index a fund is measured against. **Volatility** is how much a value moves up and down. A **factsheet** is the monthly summary a fund house publishes for each fund. The **NAV** is the price of one unit of the fund.

| Measure | The question it answers | Where you find it |
| --- | --- | --- |
| Standard deviation | How much did the returns swing? | Risk figures in the factsheet |
| Beta | How did the fund move when its benchmark moved? | Risk figures in the factsheet |
| Alpha | Did it earn more than its risk predicted? | Rarely printed |
| Sharpe ratio | How much return did it earn per unit of swing? | Risk figures in the factsheet |
| Maximum drawdown | How deep was the worst fall? | Not printed; read it off a NAV chart |

All five numbers look backwards. Compare them only between funds in the same category and over the same period. Sharpe ratios are best compared when they come from the same fund house's method, for a reason you will see below.

To make the numbers concrete, take two made-up funds. This is a hypothetical illustration, not real funds. Each starts with ₹1,00,000 and earns these returns in a year.

| Year | Fund A | Fund B |
| --- | --- | --- |
| 1 | +24% | +12% |
| 2 | −18% | +6% |
| 3 | +30% | +13% |
| 4 | +2% | +8% |
| 5 | +15% | +10% |

Fund A averages 10.6% a year and Fund B 9.8%. Yet after five years A is worth ₹1,55,052 and B ₹1,59,374, a gap of ₹4,322. The fund with the higher average ends lower. In CAGR terms, A made 9.17% a year and B 9.77%. CAGR is the average yearly growth rate, as if the money grew at the same pace each year. [Absolute return vs CAGR](https://koshex.com/blog/absolute-return-vs-cagr) explains it.

## What does standard deviation tell you?

Standard deviation tells you how far a fund's returns have swung around their average. AMFI, the industry body, describes it this way: it "indicates how widely a stock or portfolio's returns varies from its mean over a given period of time. The more spread apart the data is, the higher the deviation." The mean here is the average.

In the example, Fund A's standard deviation is 19.15 percentage points and Fund B's is 2.86. A's returns lurched between +30% and −18%. B's stayed between +6% and +13%.

A higher figure means a bumpier ride. It is not good or bad by itself, and it is only fair to compare within one category.

Factsheets usually work it out from monthly returns over the past three years. AMFI's note on its mid and small cap risk table says its figures use "monthly data for 3-years". It also calls multiplying the monthly figure by the square root of twelve "an industry standard method" of approximating an annual one. AMFI publishes standard deviation and beta every month for mid and small cap funds.

## What is beta, and should it be high or low?

Beta shows how much a fund has tended to move when its benchmark moves. AMFI describes beta as a measure of the volatility of a portfolio "compared to the market as a whole", usually a broad index. It treats the market benchmark index as 1.0, and says stocks with betas higher than 1.0 can be read as more volatile than the broad market index.

So 1 means the fund moved in step with its benchmark. Above 1 means it moved more. Below 1 means it moved less.

Here is an illustration. Say the benchmark rises 10% and the fund rises 12%. In another period the benchmark falls 10% and the fund falls 12%. The fund moves 1.2 times as much as its benchmark, so its beta is 1.2. Beta has no unit; it is a plain number.

Should it be high or low? There is no right answer, because beta only describes movement against one benchmark. A fund with beta below 1 moved less than that benchmark did. That is different from saying it carries little risk. Beta tells you how a fund moved relative to the market, not how far it fell.

## What is alpha, and can it be negative?

Alpha measures the return a fund earned for the risk it took. It is not a measure of risk itself.

One fund house's factsheet glossary defines Jensen's alpha. It is the gap between a fund's actual returns and its expected performance, given its risk as measured by beta. In plain words, it is the return above what the fund's beta and its benchmark predicted.

Here is a hypothetical example with assumed rates. Take a risk-free return of 6%, which is the return of the safest investment in a country. Say the benchmark returns 12% and the fund's beta is 1.2. The expected return is 6 + 1.2 × (12 − 6) = 13.2%. If the fund returned 15%, its alpha is 1.8 points. Simply beating the benchmark by 3 points would overstate it, because a beta of 1.2 means the fund moved more than its benchmark.

Yes, alpha can be negative. A negative alpha means the fund earned less than its risk predicted.

Factsheets rarely print alpha. In the August 2026 factsheets of three large fund houses, none shows an alpha figure. One of them computes Jensen's alpha, but its risk figures do not display it. The other two do not define it.

The closest figure you can actually find is the information ratio, which SEBI makes every equity fund (one investing in company shares) publish. The FAQ below explains it. If you are weighing funds that try to beat a benchmark against funds that aim to match one, [active vs passive funds](https://koshex.com/blog/active-vs-passive-mutual-funds-know-the-difference) covers the difference.

## What is the Sharpe ratio, and what is a good one?

The Sharpe ratio is the return a fund earned above the risk-free return for each unit of risk it took. One fund house's glossary calls it "a risk to reward ratio". Another's calls it the average return above the risk-free rate "per unit of volatility or total risk".

Back to Funds A and B, with an assumed risk-free rate of 6%. A's average beat that by 4.6 points, B's by 3.8. Dividing by their standard deviations gives a Sharpe ratio of 0.24 for A and 1.33 for B. A earned a little more on average but needed far more swinging to do it.

B has the lower average return and the higher Sharpe ratio. A high Sharpe ratio tells you about return per unit of swing, not about how large the returns were.

The 6% is an assumption. Real factsheets use an overnight money-market rate called MIBOR. As on 31 August 2026, one fund house used 5.24% and another 4.97%. Because the rate differs by fund house on the same date, Sharpe ratios from two fund houses are not strictly comparable.

A higher Sharpe ratio means more return per unit of swing, within one category and period. There is no universal good number. One fund house's glossary adds that a negative Sharpe ratio means investors were better off in risk-free assets.

## What is maximum drawdown?

Maximum drawdown is the biggest drop from a high point to a later low, over a stated period, as a percentage of the high. Factsheets do not print it, and SEBI's rules do not define it.

On year-end values, Fund A's largest fall from a peak was 18.0%, in year 2. Fund B never fell. A real fund's daily fall would be deeper, since daily values show deeper falls than yearly ones.

Now a real index. The NIFTY Midcap 150 closed at 7,469.15 on 8 January 2018 and at 4,165.90 on 23 March 2020. That is a fall of 44.2%. ₹1,00,000 invested at the start would have shrunk to about ₹55,775. These are price index figures, which leave out dividends.

Inside that stretch, the same index fell 38.7%, from 6,792.20 on 7 February 2020 to the same low on 23 March 2020. Same index, different window, different number. A maximum drawdown always depends on the dates you choose and how often you sample values.

You can see it on any NAV chart. Find the highest point before a fall and the lowest point after it, then work out the drop between them. For what such falls mean for your money, see [the risks involved in mutual funds](https://koshex.com/blog/what-are-risks-involved-in-mutual-funds).

## How do you read these numbers on a factsheet?

Most fund houses publish a factsheet for each fund every month. SEBI's rules do not prescribe its contents; they ask a scheme's offer document to carry a weblink to it. The August 2026 factsheets of three large fund houses carried each fund's size, expense ratio, fund manager, benchmark, riskometer and past returns. The expense ratio is the yearly fee, shown as a share of your money; [what is the expense ratio](https://koshex.com/blog/what-is-expense-ratio-and-why-is-it-important) explains it. Top holdings are in the factsheet too, and [mutual fund diversification](https://koshex.com/blog/mutual-fund-diversification) shows how to use them.

Risk ratios such as standard deviation, beta and the Sharpe ratio are shown by choice, not because SEBI requires them. In one fund house's factsheet, a fund's risk figures read standard deviation 12.877%, beta 0.789 and Sharpe ratio 0.875. The footnote said they were computed over three years to 31 August 2026 from month-end NAV, with a risk-free rate of 5.24%. For funds under three years old, it said the data runs from launch. A new scheme's factsheet at another fund house said these figures were "not computed" because the scheme was too young.

Past returns in a factsheet are shown against the benchmark. SEBI requires a scheme's performance to be benchmarked to the Total Return variant of its index. That is an index that counts dividends and interest as well as price gains. On AMFI's website, returns against that benchmark appear as CAGR for 1, 3, 5 and 10 years and since launch.

What SEBI does require is a monthly portfolio statement and a website dashboard of key disclosures for each scheme. For equity funds, it also requires the information ratio, published daily on the fund house's website.

Use the measures together, within one category and period, and alongside the riskometer, the label SEBI makes every fund show. For how these numbers fit with your other checks, see [how to choose the right mutual fund](https://koshex.com/blog/how-to-choose-the-right-mutual-fund-for-investment-goals). To learn how to cut risk once you know it, read [top strategies to reduce mutual fund risk](https://koshex.com/blog/top-strategies-to-reduce-mutual-fund-risk).

Koshex, as a distributor, reviews your holdings over time and flags changes (a fund's category, risk or ranking shifting).

## Frequently asked questions

### What are the five ways to measure mutual fund risk?

Five numbers describe a fund's risk from its past returns. They are standard deviation, beta, alpha, the Sharpe ratio and maximum drawdown. In turn: how much returns swung, how it moved with its benchmark, what it earned for its risk, return per swing, and its worst fall.

### Is a higher Sharpe ratio always better?

No. A higher Sharpe ratio means more return per unit of swing, within one category and period. It says nothing about the size of the returns, as the two made-up funds in this article show. Fund houses also use different risk-free rates, so figures from two fund houses are not strictly comparable.

### Is a fund with a low beta always safer?

No. Beta only shows how a fund moved compared with its benchmark index, which is set at 1.0. A beta below 1 means the fund moved less than that index did. It does not say how far the fund can fall.

### What are the Sortino ratio and Treynor ratio?

The Sortino ratio is like the Sharpe ratio but counts only the falls, not the rises. Indian factsheets rarely show it. One fund house's glossary says the Treynor ratio uses market risk (beta) instead of total risk (standard deviation). It is the return above the risk-free rate per unit of beta.

### What is R-squared in a mutual fund?

R-squared shows how closely a fund's returns have followed its benchmark. Fund house glossaries describe it as a measure of correlation between the two. It is usually given on a 0 to 100 (or 0 to 1) scale, and a high figure means the benchmark explains most of the fund's movement. That also makes its beta and alpha more meaningful.

### How are these numbers different from the riskometer?

The riskometer is a label SEBI makes every fund show, on six levels, checked every month and computed from the portfolio. Factsheets print it as a line such as "The risk of the scheme is Very High". The five measures here are worked out from past returns instead.

### What is the information ratio?

SEBI makes every equity fund publish the information ratio daily on its fund house's website with its performance, and AMFI publishes it too. It is the fund's return minus its Tier 1 benchmark's return, divided by how much that gap swung, from daily returns. It is the nearest thing to alpha you can actually find.

*This article explains how things work; it is not advice to buy or sell any investment. Mutual fund investments are subject to market risks, read all scheme related documents carefully.*
